A set of 5 blue microfiber towels. These mamajama's are the best one's on the market and Deluxe Customs approved! Won't scratch your paint on any of yours rides, not matter the age of the paint. No Stitching on side, Non Abrasive and No Tag! They can be used either wet or dry and interior/exterior. For best results when detailing your car for the show on Saturday or just quick polish for a cruise with your honey, we recommend MOONSHINE Slick and Quick with Carnuba Wax. Products sold in online store.

Peel ans stick Inlet (Einlass) Decal that's orange and black can go on "H" filters or "FRAM" Part number NLA 701 005 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

The factory photo of an H Filter from the Der whites website. The filter with an orange and black Einlass logo. We’ve also seen them with the silver and black decal. Please do your own research to decide what came with your car.

*Color variants may occur in printing process

NLA-701-005-00
NLA.701.005.00
NLA70100500

Peel and stick Small FRAM decal for top lid of oil canister. Part number NLA 701 009 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

NLA-701-009-00
NLA70100900
NLA.701.009.00

Peel and stick inlet (Einlass) decal for "H" filter black and silver in color. Part number NLA 701 004 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.


*Color variants may occur in printing process

NLA70100400
NLA-701-004-00
NLA.701.004.00

Peel and stick Large FRAM decal for bottom canister. Part number NLA 701 012 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.


NLA-701-012-00
NLA.701.012.00
NLA70101200

Peel and stick late voltage regulator decal. Part number NLA 701 007 00 for 1959-1964 For large regulator.

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

Small regulator decal comming soon.

NLA-701-007-00
NLA.701.007.00
NLA70100700

Peel and stick valve clearance decal Part number NLA 701 015 00 for 356 normal, Super, 356 C

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

NLA-701-015-00
NLA.701.015.00
NLA70101500

Peel and stick Bosch 6 volt decal part number NLA 701 008 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

NLA-701-008-00
NLA.701.008.00
NLA70100800

Peel and stick "H" filter top cover decal Part number NLA 701 003 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

NLA70100300
NLA-701-003-00
NLA.701.003.00

Peel and stick Knecht black canister decal for 1600, 1600 Super. Part number NLA 701 002 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

NLA70100200
NLA-701-002-00
NLA-701-002-00

Peel and stick Early voltage regulator decal for 1954 - 1958. Part number NLA 701 006 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process


NLA-701-006-00
NLA70100600
NLA.701.006.00

Peel and stick Bosch 12 volt decal. Part number NLA 701 010 00

Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

NLA-701-010-00
NLA.701.010.00
NLA70101000

Deluxe Customs is now supplying the small manufacture decal that is found on the top of the oil filter, between the top bolt and the fan shroud. At Deluxe Customs we call it the "triangle P". The H -Filter, which identifies with a 16 mm bolt, was one of the preferred oil filters used in the 1955-1969 Porsche 356. We have yet to receive confirmation on whether or not this was original to the H-Filter. We use these decals on all of our turn-key restorations that use an H-Filter, until informed otherwise! As far as we know, Deluxe Customs is the only place that makes them for the public .....for those that pay attention to DECALS.....(details). Sometimes it is the small things that set you apart from the others.NOTE: This is just one Decal per order.***Disclaimer*** It is up to the buyer of this decal to decide if it's for the model of their vehicle. The information above is what Deluxe customs has to offer and the buyer should do their own research.


DLX-356-105-00
DLX.356.105.00
DLX35610500

Custom fuel pump delete deco engine tin and block off plate set. Fits Pre-A though 912, all three piece engine cases. This set is needed when making the switch to fuel injection or electric fuel pump. The block off plate will fit 356A-356C engines perfectly. The delete deco engine tin piece ties everything together with a finished look. Each piece is stamped out with an aircraft quality and precision made die. Embossing in every piece to match the original engine surround. Installs in seconds using existing mounting holes. No drilling, welding or fabrication needed. All pieces have a powder coated satin black* finish and ready to be installed.

*Powder coat may vary per piece and may not match your personal engine tin

Keep the tach cable from getting caught up in the shifter or the monkey motion with these ties. When tearing down your car or just doing some maintenance, the original ties break or can never hold tight again. Close to factory reproduction these tach cable ties keep everything in place inside the tunnel. This is a must have for the meticulous concours restorer. perfect for the outlaw community as well. Use these ties to hold anything together for a more customs look instead of ugly zip-ties. Ties come in a pack of two, usually only need two per car.

Having this tool will make it so you don’t struggle with releasing and
locking the Tenax fasteners from the top or tonneau cover. With
precision from a CNC machine the EZ-POP is cut out of ABS plastic. The
Tenax EZ-POP is a strong, lightweight, tool made to hang from your keys
so you always have it with you.

No more searching for the correct felt, measuring, cutting, gluing, and installing the felt for your fuel tank. This kit is cut to correct lengths and sticky backed to make it easy to peel and stick in less than 5 minutes work. This kit is made for the straps for a Pre A through T5 B GT 80 liter fuel tank. The kit covers the two straps over the gas tank as well as the strap attached to the body.

We also have a base felt kit available.

Filler Cap insert for GT hood conversion 100MM to be Bolted in. Turn any hood into a GT hood. Totally possible to install without taking the hood down to bear metal. Comes with a custom made seal to help secure it with no unwanted vibrations. These parts are hand stamped from tooling that we have in house so you'll always get that perfect gap around your fuel cap. As you can see there are some pictures of the parts as well as a hood that we stamped out with our tool to show the gap around the fuel cap. Parts are ready to prime and paint or powder coat.

Not limited to 356. This kit would be perfect for any custom job on a 911/912, Bug, or race car. The Insert is an awesome custom look to bring your project to the next level.

We also have a weld in kit available

Filler Cap insert for GT hood conversion 100MM to be welded in. Turn any hood into a GT hood. These parts are hand stamped from tooling that we have in house so you'll always get that perfect gap around your fuel cap. As you can see there are some pictures of the parts as well as a hood that we stamped out with our tool to show the gap around the fuel cap. parts are ready to paint or powder coat.

Not limited to 356. This kit would be perfect for any custom job on a 911/912, Bug, or race car. The Insert is an awesome customs look to bring your project to the next level.



We also have a bolt in kit available

No need to search the garage high and low when there’s a full kit of
screws to match originals available. Handmade in Germany The hardware is
clear zinc plated to prevent corrosion. Din 84 m6 x 1.0 x 12mm engine
sheet metal screws and washers made to factory specifications to fill in
the ones that are missing or replace the screws all together. Set comes
with 25 screws and washers.

Deluxe Customs manufactures these new "Carburetor Heater Delete Deco Cap set" with stainless steel hardware. Each piece is stamped out with an aircraft quality and precision made die. All pieces have a powder coated satin black finish ready to be installed. These caps finish up your engine bay for a much cleaner look.
"USE THIS PRODUCT WITH DLX 356 107 01"

*Powder coat may vary per piece and may not match your personal engine tin*

Custom oil filler/breather delete deco engine tin. Fits Pre-A though 912. When switching to a later 356C oil filler or custom breather system make sure to replace the original tin with this custom engine tin. The oil filler delete comes with a grommet for the oil dipstick to prevent unwanted vibration. This custom tin doesn’t allow your engine to suck up hot air from under the car. Each piece is stamped out with an aircraft quality and precision made die. Embossing in every piece to match the original engine surround. Installs in seconds using existing mounting holes. No drilling, welding or fabrication needed. All pieces have a powder coated satin black* finish and ready to be installed.

*Powder coat may vary per piece and may not match your personal engine tin

Let us take the worry about doing any fabrication or drilling any holes to install a full flow system. This bracket mounts along with the rear bumper in the wheel well. Most 3 hole remote oil filter adapters will fit our bracket.(Empi 9244 remote oil adapter is available at Jbugs.com) Full adjustment with moving the bracket forward, back, inside or outside of the bumper bracket to help fitment. Very easy to install in an afternoon. Each piece is cut out with an aircraft quality precision. Made from stainless steel with a black powder coat finish. Very easy to install in an afternoon.

Pre A/A brackets come with a nut plate to ensure correct hole placement.

**Note: The remote oil filter adapter and oil filter does not come with the bracket. to show how it is to be mounted on the vehicle the pictures of the bracket is installed in a 356A

Let us take the worry about doing any fabrication or drilling any holes to install a full flow system. This bracket mounts along with the rear bumper in the wheel well. Most 3 hole remote oil filter adapters will fit our bracket.(Empi 9244 remote oil adapter is available at Jbugs.com) Adjustment with moving the bracket inside or outside of the bumper bracket to help fitment. Very easy to install in an afternoon. Each piece is cut out with an aircraft quality precision. Made from stainless steel with a black powder coat finish. Very easy to install in an afternoon.

**Note: The remote oil filter adapter and oil filter does not come with the bracket. to show how it is to be mounted on the vehicle the pictures of the bracket is installed in a 356A

Porsche 356 "No Drill" Dual Master Cylinder Reservoir Mounting Bracket. Fitment for 356 PreA - A - T-5B. This is made to fit ZIMS 356 Dual Stage Master Cylinder Conversion Kit (Look For QR Link in Photos)...

1962-63 only Porsche 356 T-6 B Fuse panel decals. 644.612.831.06

Fuse panel decals look exactly like the originals. Deluxe Customs has reproduced fuse panel and engine decals to replace your water transfers. These peel and stick decals are made from the thinnest decal material known. Best match to the water transfers thickness. Designed based on the best original NOS/OEM decals found for sizing, lettering, and color*. Unlike water transfers these will not get blown off or washed off your engine when cleaning. Being a peel and stick decal there's also no shrinking or delamination after long periods of being exposed to heat. Finally, they will stick to both paint and powder coat with perfect adhesion. The last decals you will buy for your car.

*Color variants may occur in printing process

644.612.831.06
644-612-831-06
64461283106

No more searching for the right felt, measuring, cutting, gluing, and installing the felt for your fuel tank. These pre-measured kits make it easy to peel and stick in less than 5 minutes work. We have 3 kits available for your personal need.

Instructions to install here on our website

No more searching for the right felt, measuring, cutting, gluing, and installing the felt for your fuel tank. These pre-measured kits make it easy to peel and stick in less than 5 minutes work. We have 3 kits available for your personal need.

We understand that originally the bottom fuel tank pads were Jute. With the jute not cooperating with the peel and stick, we found a suitable felt that would be the correct thickness. With the felt being under the gas tank for no one to see and it doing the job of padding the gas tank we thought this would suffice.

Instructions for install here at our website

No more searching for the right felt, measuring, cutting, gluing, and installing the felt for your fuel tank. These pre-measured kits make it easy to peel and stick in less than 5 minutes work. We have 3 kits available for your personal need.

We understand that originally the bottom fuel tank pads were Jute. With the jute not cooperating with the peel and stick, we found a suitable felt that would be the correct thickness. With the felt being under the gas tank for no one to see and it doing the job of padding the gas tank we thought this would suffice.


Instructions for install is here at our website

1959-1962 356 Convertible D/Roadster window frame sliders DLX35610100-$80

These sliders go into the window frames of your convertible D or Roadster. These parts not only help your windows go up or down smoothly but keeps your windows from vibrating or shaking in your doors. These parts have never been reproduced and we are the first to have them available. One kit per window needed!